MrBlakeandClaude Sonnet 5
63538c2efe
- Fix "images only" leaving plain labels visible on faces where a device has no image for that side (e.g. no rear_image set): the view selector now hides every plain label outright in that mode, not just the ones an image happens to sit on top of. - Remove the "Add planned device" button from the elevation card. Empty units are now click targets themselves - clicking one opens the add-device form pre-filled with that position and face, exactly like a real rack's elevation. Occupancy is computed per unit per face from the existing device blocks. - Add cabling for concept devices: ConceptComponent (interfaces, front/rear ports, power ports/outlets, console ports) and ConceptCable (a connection between two components, restricted to devices in the same concept). components.sync_components() populates a device's components from its device type's templates, including the front/rear port pass-through mapping copied from DeviceType.port_mappings - so a device with front/rear port templates (a patch panel being the common case) behaves exactly like a real one, without hardcoding anything role-specific. Placeholder devices without a device type get components added by hand. Full CRUD views, tables, filtersets, API endpoints and a "Connect" action wired in from the device detail page. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
91 lines
2.8 KiB
Python
91 lines
2.8 KiB
Python
from utilities.choices import ChoiceSet
|
|
|
|
|
|
class ConceptStatusChoices(ChoiceSet):
|
|
"""Lifecycle of a rack blueprint."""
|
|
key = 'RackConcept.status'
|
|
|
|
STATUS_DRAFT = 'draft'
|
|
STATUS_REVIEW = 'review'
|
|
STATUS_APPROVED = 'approved'
|
|
STATUS_ARCHIVED = 'archived'
|
|
|
|
CHOICES = [
|
|
(STATUS_DRAFT, 'Draft', 'gray'),
|
|
(STATUS_REVIEW, 'In review', 'orange'),
|
|
(STATUS_APPROVED, 'Approved', 'green'),
|
|
(STATUS_ARCHIVED, 'Archived', 'red'),
|
|
]
|
|
|
|
|
|
class ConceptDeviceStatusChoices(ChoiceSet):
|
|
"""
|
|
What a planned device means. This is deliberately *not* dcim's device status:
|
|
a blueprint describes intent, not operational state.
|
|
"""
|
|
key = 'ConceptDevice.status'
|
|
|
|
STATUS_PLANNED = 'planned'
|
|
STATUS_EXISTING = 'existing'
|
|
STATUS_OPTIONAL = 'optional'
|
|
STATUS_RESERVED = 'reserved'
|
|
|
|
CHOICES = [
|
|
(STATUS_PLANNED, 'Planned', 'blue'),
|
|
(STATUS_EXISTING, 'Existing', 'green'),
|
|
(STATUS_OPTIONAL, 'Optional', 'cyan'),
|
|
(STATUS_RESERVED, 'Reserved space', 'gray'),
|
|
]
|
|
|
|
|
|
class WidthFractionChoices(ChoiceSet):
|
|
"""
|
|
Horizontal subdivision of a rack unit, mirroring the partial-width feature of
|
|
netbox_utilities. The value is the denominator: 1 = full width, 2 = half, ...
|
|
"""
|
|
FRACTION_FULL = 1
|
|
FRACTION_HALF = 2
|
|
FRACTION_THIRD = 3
|
|
FRACTION_QUARTER = 4
|
|
|
|
CHOICES = (
|
|
(FRACTION_FULL, 'Full width'),
|
|
(FRACTION_HALF, '1/2'),
|
|
(FRACTION_THIRD, '1/3'),
|
|
(FRACTION_QUARTER, '1/4'),
|
|
)
|
|
|
|
|
|
# Least common multiple of all supported denominators. The elevation is laid out
|
|
# on this many lanes so that every fraction lands on an integer lane boundary.
|
|
LANE_COUNT = 12
|
|
|
|
|
|
class ConceptComponentTypeChoices(ChoiceSet):
|
|
"""
|
|
The kinds of pluggable component a planned device can carry. One shared model
|
|
covers all of them (see ConceptComponent) rather than mirroring dcim's seven
|
|
separate component models - a blueprint only needs enough detail to say what a
|
|
cable plugs into, not full per-type validation.
|
|
"""
|
|
TYPE_INTERFACE = 'interface'
|
|
TYPE_FRONT_PORT = 'front-port'
|
|
TYPE_REAR_PORT = 'rear-port'
|
|
TYPE_CONSOLE_PORT = 'console-port'
|
|
TYPE_CONSOLE_SERVER_PORT = 'console-server-port'
|
|
TYPE_POWER_PORT = 'power-port'
|
|
TYPE_POWER_OUTLET = 'power-outlet'
|
|
|
|
CHOICES = [
|
|
(TYPE_INTERFACE, 'Interface', 'blue'),
|
|
(TYPE_FRONT_PORT, 'Front port', 'orange'),
|
|
(TYPE_REAR_PORT, 'Rear port', 'yellow'),
|
|
(TYPE_CONSOLE_PORT, 'Console port', 'teal'),
|
|
(TYPE_CONSOLE_SERVER_PORT, 'Console server port', 'cyan'),
|
|
(TYPE_POWER_PORT, 'Power port', 'red'),
|
|
(TYPE_POWER_OUTLET, 'Power outlet', 'pink'),
|
|
]
|
|
|
|
#: Component types that are pass-through ports and can appear in a ConceptPortMapping.
|
|
PATCH_TYPES = (TYPE_FRONT_PORT, TYPE_REAR_PORT)
|